KOMPONEN AKI GLOBAL AUTOMOTIVE

[ 1 ] Centered Cast-on Plate Straps
- Stronger than the thinner gas-burned conventional connectors.
- Reduce the lever action movement resulting from road shock.

Bagian tengah dicetak dengan plat keras

-Lebih kuat dari pada konektor cairan pengencer gas yang mudah terbakar dibandingkan konektor biasa.

Mengurangi reaksi pergerakan akibat dari waktu pemindahaan.

[ 2 ] Exclusive Patented Liquid Gas Separator
- Prevents electrolyte losses by collection and returning liquid to the reservoir.
- Vents allow the battery to "breathe" during temperature changes and charging.

[ 3 ] Flame Arrester
- Safety system
- Prevent the explosion from stark of outside
- Minimize the acid-leakage
- Prevent the inflow of dust

[ 4 ] Heat-Sealed Cover
- Prevent contamination and also adds to the strength and rigidity.
- Include permanent flame arresters to prevent and accidental explosion from external sparks or flame.
- Have hydrometer built in for faster checking

[ 5 ] Hydrometer
At full charge, the electrolyte specific gravity is 1.280 while at 50% of charge? considered the minimum serviceable condition, the specific gravity is typically ? 1.220. In a typical situation when the specific gravity drops to 1.100, the battery ? is fully discharged.

[ 6 ] Low-Resistance Envelope Separator
- Encapsulate negative plates
- Improve vibration durability
- Prevent "treeing" and internal shorting between pos. and neg. plates

[ 7 ] Polypropylene Case
- Reinforced design is precisely tailored to support the battery elements.
- Material is exceptionally strong, durable and withstands road shock and vibration

[ 8 ] Wrought Lead-Calcium Grid
- Offer considerable strength
- Resistant to grid corrosion
- Over-charge resistant
- Minimal gassing and water usage
- Less self-discharge
- Resist thermal runaway


Sustenance of enough electrolyte prior to a termination owing to an increment of acid volume in the upper parts of plates.
Kemurnian air accu(aki) zuur serta sampai pemakaian yang cukup lama tidak akan berkurang, dan air accu(aki) zuur tetap masih diatas plat.
Designed to keep a proper level of electrolyte in the upper part of plates via accomodating an acid volume by 40mm cr so higher than competitors to sustain an acid volume in case of water consumption caused by an evaporation at a high temperature Dirancang untuk menyimpan air accu(aki) zuur agar selalu diatas plat dengan mengakomodasi volume air accu(aki) 40 mm lebih tinggi daripada pesaing – pesaing lain untuk menjaga volume air accu(aki) zuur dalam tetap cukup akibat konsumsi air yang disebabkan oleh penguapan pada suhu yang tinggi.
Application of cold-furged bushing & leakage-proof
Aplikasi terminal (tabung) ditempa pada saat dingin & mencegah kebocoran.
 
- Minute tissue (Increase of strenght)
- Prevention of whitening & discoloration
via oil applying
- Jaringan tissue ( Meningkatkan kekuatan)
- Mencegah pemutihan <sulfalisasi> &
pelunturan korosi melalui campuran minyak
An increase of life span via adoption of spun-bonded paper
Memperpanjang umur pemakaian melalui lapisan lembar spun-bonded
 
An increase of life span via maintenance of active materials of positive plates
Memperpanjang umur pemakaian melalui perawatan bahan-bahan aktif dari plat-plat positif
An increment of anti-corrosion & life span via an adoption of grid in high Sn(tin)
Bebas-korosi yang sempurna melalui suatu proses Kisi dengan kandungan Sn yang sangat tinggi (tin)
1. Dismantling of battery after leaving for 24 months at an ambient
temperature
1. Baterai dibongkar setelah keluar selama 24 bulan disesuaikan dengan suhu   lingkungan.
 
Ranking in an anti-cromosin under the condition of specific gravity 1.280 at 25 degrees celcius of an ambient temperature.
Peringkat dalam anti-cromosin di bawah kondisi berat jenis 1,280 pada 25 derajat celciusdisesuaikan dengan suhu lingkungan.
 
2. Ranking in life span under overcharging of high temperature
2. Peringkat di bawah, masa hidup pengisian yang berlebihan pada suhu tinggi.